Product ID:IG-LO REFRIGERANT 12 #1001
MSDS Date:01/01/1987
FSC:6850
NIIN:00F005495
MSDS Number: BBSPY

VALVOLINE OIL CO/ASHLAND, KT 41114

Emergency Phone: (606) 329-3333

Cage: 72527

VALVOLINE OIL CO

14000 LEXINGTON, KY 40512 US

Telephone: 606-357-7206 / 800-274-5263

Cage: 72527

DICHLORODIFLUOROMETHANE (SARA III)

CAS: 75-71-8

RTECS: PA8200000

Fraction By Weight: >95%

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Effects of Overexposure:RESP & SKIN
IRRITANT/DIZZINESS/HEADACHE/UNCONSCIOUSNESS/NAUSEA/VOMITING/DIARRHE
A/FREEZES SKIN.

First Aid:SKIN: SLOWLY WARM AFFECTED AREA W/WATER. GET MEDICAL
ATTENTION. EYES: FLUSH W/WATER. GET MEDICAL ATTENTION. SWALLOWED:
DRINK 2 GLASSES OF WATER & INDUCE VOMITING. NEVER GIVE BY MOUTH IF
UNCONSCIOUS. G ET MEDICAL ATT. INHALATION: REMOVE TO FRESH AIR.

Fire Fighting Procedures:WEAR SCBA W/FULL FACEPIECE OPERATED IN
PRESSURE-DEMAND.

Spill Release Procedures:VENTILATE AREA. ALLOW TO EVAPORATE. PERSONS
NOT WEARING PROTECTIVE EQUIPMENT SHOULD EXCLUDED FROM AREA UNTIL
LEAK HAS BEEN REPAIRED.

Handling and Storage Precautions:CONTAINERS OF THIS MATERIAL MAY BE
HAZARDOUS WHEN EMPTIED, SINCE EMPTIED CONTAINERS RETAIN PROCT
RESIDUES (VAPOR, LIQUID AND/OR SOLID).
Other Precautions:TREAST AS HAZARDOUS WASTE. _

Respiratory Protection:A NIOSH/MSHA APPROVED AIR SUPPLIED RESPIRATOR IS
ADVISED.
Ventilation:PROVIDE SUFFICIENT MECH/LOCAL EXHAUST VENT TO KEEP Protective Gloves:POLYVINYL
Eye Protection:GOGGLES/SAFETY GLASSES
Other Protective Equipment:NORMAL WORK CLOTHING COVERING ARMS AND LEGS.
Supplemental Safety and Health
MSDS DATE: 02/03/87

Boiling Pt:B.P. Text:-21.60F
Vapor Density:4.3
Spec Gravity:1.310
Evaporation Rate & Reference:FASTER THAN ETHER
Appearance and Odor:CLEAR & COLORLESS, GAS.
Percent Volatiles by Volume:100%

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH, ALKALI METALS, POWEDERD METALS, ALKALINE
Hazardous Decomposition Products:MAY FORM TOXIC/HYDROGEN
CHLORIDE/PHOSGENE/HYDROGEN FLUORIDE.

Waste Disposal Methods:ALLOW MATERIAL TO EVAPORATE. RETURN TO SUPPLIER
FOR RECLAMATION.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.